Blog

Blog

Nieregularne lustro na wymiar z podświetleniem LED nad podwójną umywalką – realizacja ALHEN Poradniki o szkle

How much does a made-to-measure mirror cost in Poznań? Seven factors…

Short answer: there is no single honest price for every made-to-measure mirror. The final quotation depends on the panel size, shape, edge processing, holes and cut-outs, the selected mirror option, lighting, and the scope of measurement, transport and installation. For an initial calculation, send the width, height, a photograph of the entire wall and a list of required features.

This guide is for people planning a mirror for a bathroom, hallway, dressing room or fitted interior who want to compare quotations for the same scope of work. Instead of offering an arbitrary price per square metre, it explains seven elements that change the project.

At a glance:

  • surface area alone does not define the whole project;
  • an irregular shape, holes, decorative edges or LED lighting require additional decisions;
  • a photograph and a simple dimensioned sketch make the initial quotation more precise;
  • check whether measurement, processing, delivery and installation are included;
  • ALHEN confirms the exact price for an agreed project variant.

Contents

  1. Can a mirror be priced per square metre?
  2. Seven factors that affect the quotation
  3. How to prepare an enquiry
  4. How to compare two quotations
  5. ALHEN project: an irregular LED mirror
  6. Frequently asked questions

Can a made-to-measure mirror be priced per square metre?

A square-metre rate can be one part of the calculation, but it rarely describes the complete order. Two mirrors with the same area may have different shapes, numbers of holes, edge finishes, lighting requirements or delivery conditions.

A reliable quotation should therefore state exactly what is included: the mirror panel, processing, optional features, measurement, transport, carrying and installation. Without this detail, a lower headline figure may cover a much narrower service.

Seven factors that affect the price of a made-to-measure mirror

1. Width, height and panel format

Dimensions determine the area of material, but they also affect preparation, transport and installation. A large panel may require additional people for safe handling and an earlier check of access to the room.

Provide the width and height in millimetres. If the mirror must fit a recess or the space between tiles, measure at several points and make clear that these are preliminary dimensions. The final format must be confirmed before production.

2. Rectangular or irregular shape

A rectangle can be defined with a small set of dimensions. An arch, oval, rounded corner or organic contour may require an additional drawing, template or agreed digital file.

Do not assume that an inspiration photograph is sufficient for production. Attach it, but also include the overall dimensions and show where the contour will sit relative to furniture, tiles and fittings.

3. Finish of visible edges

An edge concealed by a frame or fitted unit has a different processing scope from an exposed edge. The length of the processed perimeter and the required visual finish may affect the quotation.

State which edges will be visible. If you are considering a decorative bevel or another finish, ask for it to be itemised separately. Availability and detail must be confirmed for the selected mirror variant.

4. Holes, cut-outs and coordination with fittings

Sockets, switches, wall lights, taps, shelves and furniture may require accurately positioned holes or cut-outs. Their number, shape, dimensions and distance from the edge all matter.

Send a photograph of the whole wall and a sketch with reference lines and measurements. Do not infer a socket position from a photograph alone. For a complex layout, agree whether a site measurement is needed before production approval.

5. Mirror type and appearance

The selected panel affects the colour of the reflection, the appearance of the edge and its intended application. A quotation may concern a standard option, a different tint or a product that needs additional protection. Not every option is available in every format.

Describe the desired result rather than inserting an unverified product name. ALHEN can then confirm the available variant and its effect on the quotation. Manufacturer or collection names should be used only after current availability has been checked.

6. LED lighting and additional features

An LED mirror requires more decisions than an unlit panel. The scope can depend on the lighting contour, control method, cable position, space behind the mirror and coordination with the room’s other lighting.

State whether the light is intended mainly for atmosphere or to support daily tasks. Mark the power location and preferred switching method. Find more planning questions in the guide Made-to-measure LED mirror — seven decisions before ordering.

7. Measurement, transport, access and installation

The final price also depends on work outside the workshop. Delivering a small mirror to an accessible wall is different from carrying a large panel, fitting a recess or working in a finished interior with restricted access.

Provide the town, floor, lift availability, access width and condition of the installation area. For locations outside Poznań, ALHEN will confirm whether the service and logistics are available. The fixing method must be selected for the substrate and the specific project.

How should you prepare a mirror quotation request?

Complete information reduces assumptions in the first calculation. You can copy this checklist into your message:

InformationWhat to provide
Dimensionswidth and height in mm; several measurements for a recess
Shaperectangle, circle, oval, arch or irregular contour
Edgeswhich edges will be visible and the required finish
Holes and cut-outsnumber, shape, dimensions and position
LEDdesired lighting effect, control method and power location
Installation areaphotograph of the whole wall, substrate and project stage
Logisticstown, floor, lift, access and whether installation is required

Message template:

Please provide an initial quotation for a made-to-measure mirror. Approximate width: … mm; height: … mm. Shape: … . Visible edges: … . Holes or cut-outs: … . LED lighting: yes/no; power location: … . Location: … . Measurement and installation: yes/no/to be discussed. I have attached a photograph of the whole wall and a dimensioned sketch.

Send the information through the ALHEN contact form or start from the ALHEN made-to-measure mirrors page.

How should you compare two mirror quotations?

Compare the same variant and the same service scope. Check whether each quotation includes:

  • the intended mirror type and format;
  • processing of every visible edge;
  • holes, cut-outs and any required template;
  • lighting components and a clearly described electrical-work scope;
  • measurement, transport, carrying and installation;
  • installation materials;
  • VAT;
  • quotation validity and the expected completion time.

If any item is unclear, ask for clarification before comparing totals. With LED mirrors in particular, do not assume that electrical connection is automatically part of mirror installation.

ALHEN project: an irregular LED mirror

The featured photograph shows an irregular mirror with a warm halo above a double washbasin. Its organic contour and the arrangement of taps, sockets and lighting demonstrate why panel area alone is not enough for a quotation.

A made-to-measure mirror like this should be described together with its contour, power-supply position and the placement of fittings on the wall.

A similar enquiry should include at least the overall dimensions, the contour, the power position and the relationship to fittings on the wall. The photograph comes from ALHEN’s project portfolio; no unconfirmed location or hidden technical specification is attributed to it.

Frequently asked questions

How much does one square metre of made-to-measure mirror cost?

A square-metre rate may describe only part of the order. The total cost also depends on shape, processed edge length, holes, cut-outs, lighting, measurement, transport and installation. Request a quotation for the complete agreed variant rather than the panel area alone.

Is a small mirror always inexpensive?

A smaller area usually requires less material, but some costs do not decrease proportionally. Measurement, holes, transport or installation may still be needed. Even for a small mirror, provide the full scope and check precisely what the quotation includes.

What tends to increase the price of an LED mirror?

An irregular shape, extensive lighting, controls, additional features, power preparation and difficult installation can all increase the scope. Their exact effect depends on the project. Ask for separate comparisons of a basic and an extended variant where appropriate.

Is a professional measurement needed for a quotation?

Approximate dimensions, a wall photograph and a simple sketch are often enough for an initial calculation. Final dimensions must still be confirmed for a recess, a fit between tiles or a mirror with several cut-outs. ALHEN will determine the required measurement scope after reviewing the project.

Which photographs should be included with an enquiry?

Send one straight-on photograph of the entire wall, another showing access to the installation area, and close-ups of sockets, wall lights or other obstructions. Add a dimensioned sketch. Photographs help define the scope, but do not replace final measurement.

How long does a made-to-measure mirror take?

Timing depends on panel format, shape, processing, lighting components and the readiness of the installation area. A single completion time should not be assumed for every project. ALHEN should confirm the expected schedule together with the scope and price of the selected variant.

How much does a made-to-measure mirror cost in Poznań? Request a specific quotation

Najbardziej użyteczna odpowiedź powstaje po opisaniu siedmiu elementów: wymiarów, kształtu, krawędzi, otworów, rodzaju tafli, podświetlenia oraz zakresu pomiaru i montażu. W doświadczonym zakładzie szklarskim w Poznaniu ALHEN porównujesz kompletne rozwiązania dopasowane do Twojego wnętrza zamiast przypadkowych stawek.

Send the dimensions, a wall photograph and the required options through ALHEN contact. You can also review the complete made-to-measure mirror service and state whether measurement, transport and installation in Poznań are required.

Technical sources

These sources explain general product differences and installation considerations. They do not state that ALHEN used a particular brand for the featured project. The current product variant and installation method must be confirmed in the quotation.

Okrągłe lustro LED na wymiar w nowoczesnej łazience – realizacja ALHEN Poznań Poradniki o szkle

Made-to-measure LED mirror — seven decisions before ordering

A bespoke LED mirror can be sized and shaped for a particular bathroom, dressing room or hallway, with lighting selected for the space. The result depends on more than the appearance of the glass. The power supply, light colour, position relative to the basin and furniture, and installation method all need to be planned. This ALHEN project illustrates the effect and the information needed for a quotation in Poznań.

Round bespoke LED mirror installed by ALHEN
An ALHEN project: a round mirror with even LED backlighting.

What does this project show?

The round pane is surrounded by a soft halo which separates the mirror from the wall and adds another layer of light to the room. This differs from lighting directed only forwards: backlighting creates atmosphere and emphasises the shape, but may not replace task lighting needed for detailed make-up or shaving.

The project should therefore begin with function. If the mirror is intended to provide the main task light, the emission direction, intensity and other fittings need to be assessed. If it is primarily decorative, a soft halo and coordination with the wall finish may matter more.

How should the shape and dimensions be chosen?

Element What to check Common mistake
Width or diameter Relationship to the basin, cabinet and available wall Choosing a size without allowing for taps and lights
Installation height User heights and the worktop position A lower edge that is too high or conflicts with fittings
Shape Lines of furniture, tiles, recesses and doors Insufficient space for an even halo near a corner
Distance from the wall Depth of the LED structure and any additional equipment Forgetting that the side is visible from the entrance

Approximate dimensions are sufficient for an initial quotation, but the distances from tile edges, furniture, sockets and fittings must be confirmed before production. A single measurement is not sufficient for an irregular recess.

Light colour and controls

Warm light creates a more atmospheric effect, neutral light is versatile, and cooler light may feel more technical. Coordinate the colour with the other fittings and the interior palette. Different sources described by the same colour temperature can still look slightly different, so lighting should be considered as a whole.

Control can be linked to a wall switch or to an additional component in the mirror if the selected construction allows it. The cable position and access to the power supply should be agreed during electrical installation. Electrical work must follow the design and rules applicable to wet rooms.

What should be planned for a bathroom LED mirror?

  • the exact installation zone and substrate;
  • the power supply and switch position;
  • distance from the basin, tap, shower and other water sources;
  • a light colour coordinated with other fittings;
  • space for the structure and ventilation behind the pane;
  • any optional equipment to be integrated into the mirror.

The availability of sensors, demister pads, magnifying sections or other functions must be confirmed for the chosen design. Not every option suits every shape and size.

How to prepare an enquiry

  1. State the required width, height or diameter.
  2. Attach a photograph of the whole wall and a simple dimensioned sketch.
  3. Mark the basin, tap, tiles, furniture, sockets and cable position.
  4. Describe the desired lighting effect and preferred control method.
  5. State the location, stage of work and intended installation date.

For an unusual shape, provide an inspiration image and drawing. ALHEN will confirm what documentation is needed before production.

What affects price and lead time?

A quotation depends on pane dimensions and shape, edge processing, the lighting construction, controls, additional functions, substrate preparation, transport and installation. Unusual cut-outs, a complex template or restricted access may increase the work involved. Lead time depends on component availability, the degree of customisation and whether the installation area is ready.

A reliable offer should relate to the agreed configuration, not only the mirror area. A wall photograph and sketch make it easier to identify details requiring clarification.

Bespoke LED mirrors in Poznań — quotation

Send a wall photograph, dimensions, required shape and power-supply information through the ALHEN contact form. See also the bespoke mirror service and our guide to glass and mirrors made to order.

Panel szklany do kuchni w kolorze białym – realizacja Poznań Poradniki o szkle

Glass kitchen splashbacks in Poznań – selection and quotation

A glass splashback is easy to clean, can make a kitchen feel larger and allows colour or artwork to be coordinated with the cabinetry. Before ordering, however, the glass type must be selected, socket cut-outs planned, conditions around the hob checked and an accurate survey completed. This guide compares the main options and explains what affects quotations for glass kitchen splashbacks in Poznań.

Lacobel or printed glass?

Option Main benefit What to consider Best suited to
Glass painted in a single colour A consistent surface and a broad colour choice Compare the shade with cabinet fronts in the intended light Minimal, calm interiors
Printed glass An individual image, photograph or pattern File quality, cropping and visibility behind equipment Kitchens needing a strong decorative accent
Clear glass Protects a visible wall, wallpaper or decorative finish The substrate and adhesive arrangement must look tidy Projects retaining the existing wall finish
Matt or tinted glass A restrained effect with reduced reflections Different lighting can change perceived colour Contemporary, darker schemes

Lacobel is AGC’s brand of painted glass. The manufacturer describes it as an interior product; a splashback project must use the appropriate variant and installation method. See the AGC Lacobel technical information. Confirm available colours and product variants when ordering.

Should a kitchen splashback be toughened?

Toughened glass is often selected above worktops because it is more resistant to stress and temperature changes. Every hole, cut-out and edge treatment is completed before toughening; a socket cannot simply be moved or a pane trimmed afterwards. Selection near a hob must account for the appliance instructions, required distances and ventilation conditions.

Do not rest hot cookware directly against the splashback or treat the glass as a substitute for the hob manufacturer’s requirements. For a gas installation, the design and safe distance from burners must be checked.

How to survey a glass splashback

  1. Measure wall width and height at several points.
  2. Mark the underside of wall units and the worktop, checking their level.
  3. Record the exact position of sockets, switches, pipes and other obstacles.
  4. Identify internal and external corners and any pane joints.
  5. Add photographs of the entire kitchen and close-ups of unusual details.
  6. State the hob or cooker model and the existing wall finish.

A production survey is best completed after the cabinets and worktop have been installed and final levels are known. If a pane needs to fit below an extractor or into narrow channels, the installation sequence and necessary clearances must be considered. ALHEN can verify the scope on site for an agreed project.

A project before and after installation

The photographs below show a kitchen before and after a glass splashback was installed. A documented project makes it easier to see how one continuous glass surface changes the visual balance and available light.

Kitchen wall before installation of a glass splashback
The wall above the worktop before installation.
Kitchen after installation of a fitted glass splashback by ALHEN
The kitchen after installation of the made-to-measure pane.
Before and after comparison of an ALHEN glass kitchen splashback
A comparison of the kitchen before and after the project.

Colour, print and Optiwhite glass

Standard clear glass may have a slight green tint, particularly noticeable with whites and pale colours. Low-iron glass such as Optiwhite reduces this effect and can reproduce whites and light artwork more faithfully. Compare samples where possible, because glass thickness, lighting and substrate colour also affect the result.

For printed glass, supply a high-resolution file and agree the crop on a visual proof. Important parts of an image should not fall behind socket cut-outs, pane joints, the extractor or tall equipment on the worktop.

Installation and care

The substrate should be stable, even and prepared for the chosen installation method. Adhesives, sealants and channels must be compatible with the glass and its coating. On painted glass, unsuitable installation products may affect the decorative layer, so use solutions recommended for the product.

Routine cleaning normally needs only a soft cloth and a mild glass cleaner. Avoid abrasives, sharp scrapers and aggressive products that may damage the coating, joints or edge seals.

What affects the price of a glass splashback?

There is no single reliable price per metre for every splashback. A quotation depends on:

  • glass type, thickness and variant;
  • toughening, colour, artwork or an additional coating;
  • the number, dimensions and shapes of the panes;
  • socket holes, cut-outs and edge processing;
  • survey, transport, access and installation;
  • substrate preparation and an unusual work sequence.

Photographs and approximate dimensions are sufficient for an initial proposal. The final quotation relates to the selected material, colour or print and verified dimensions.

Glass kitchen splashbacks in Poznań — quotation

Send photographs, approximate dimensions, the number of sockets and your preferred colour or image through the contact form. You can also view ALHEN’s printed glass splashback projects and read how to order glass cut to size.

Drzwi i ścianki szklane na wymiar w czarnej konstrukcji – realizacja ALHEN Poradniki o szkle

Custom Glass Doors and Partitions – Guide

Custom glass doors and partitions make it possible to separate zones in a house, flat, office or commercial interior while preserving daylight and a sense of open space. The best results come from a design tailored to the specific opening, intended use, required privacy and installation conditions.

In this guide, ALHEN Artszkło explains when to choose a door, a fixed partition or a combined solution, which glass and fittings to consider, what to prepare for measurement, and what determines the price in Poznań and the surrounding area.

Key points at a glance

  • For a bright division of the interior consider a fixed partition, a hinged door, a sliding door or a combined arrangement.
  • Glass and the fixing system are selected for the dimensions, installation conditions, room function and required level of privacy.
  • For an initial quotation prepare photos of the opening, its approximate width and height, the project location and a description of the desired arrangement.
  • Before production an accurate survey and confirmation of every design element are required.

Contents

What are custom glass doors and partitions?

A custom glass enclosure is a set of fixed panes, doors and fixing components designed for a specific location. It can fill an entire opening between walls, form a corner, create a private office or combine a fixed section with a passage. Unlike an off-the-shelf product, its dimensions, divisions, opening method and fitting design are determined by the conditions of the individual project.

A solution should not be chosen from an inspiration photo alone. The substrate, possible fixing points in the walls, floor and ceiling, user traffic, furniture layout and concealed services also matter. The final configuration is therefore established after the location has been assessed and accurately measured.

Where do custom glass doors and partitions work well?

Glass helps organise an interior without building a full opaque barrier. It passes light between zones and preserves visual continuity, which makes it suitable for both modern and more traditional schemes.

  • In houses and flats: between a kitchen and living room, in a hallway, dressing room, home office or an unusual recess.
  • In offices: to create a meeting room, private office, quiet work zone, reception area or a passage between teams.
  • In commercial interiors: as a divider between the customer area and back room, an internal shopfront element or a clear functional boundary.
  • In renovated buildings: when an opening has a non-standard width, height or shape and requires an individual solution.

See more examples in the ALHEN portfolio: glass doors and walls. The gallery presents different arrangements, frame colours and ways of combining panes with doors.

Fixed partition, hinged door or sliding door?

SolutionWhen to consider itWhat to check before deciding
Fixed glass partitionWhen a permanent division is required and no passage is needed at that pointSubstrate, fixing points, pane divisions and required privacy
Hinged doorWhen an intuitive and frequently used passage is importantSwing clearance, opening direction and possible collisions with furniture
Sliding doorWhen there is not enough space beside the opening for a door leaf to swing freelySpace for the pane to slide, system guidance and access to fixing points
Partition with a doorWhen one design must both divide a zone and provide a passageProportions of fixed elements, passage width and frequency of use

No single arrangement suits every interior. Hinged doors can be convenient but need clear swing space. A sliding system saves space in front of the passage but requires room for the leaf to move aside. For a wide opening, combining a door with fixed sections is often practical.

ALHEN project: a glass wall in a black frame

Drzwi i ścianka szklana na wymiar w czarnej konstrukcji – realizacja ALHEN
ALHEN project example: a tall glass partition with sliding doors and black divisions.

The photo shows how an enclosure can define a room while preserving views and daylight. Regular black divisions become part of the design, while the sliding leaf needs no swing area in front of the passage. This is a visual example; structural details are always determined individually for the specific location.

Which glass should you choose for a door and partition?

Glass selection begins with the function of the enclosure. A transparent divider between a kitchen and living room has different requirements from an office that needs partial privacy or a heavily used passage in commercial premises. Pane dimensions, support method, fittings and conditions of use all matter.

Tempered Glass

ALHEN uses toughened glass in many door and wall projects. Holes and cut-outs for hinges, handles and other fittings must be planned before toughening, so the complete design is approved before the pane is manufactured. A specialist selects the thickness and format for the specific system, dimensions and installation conditions.

Laminated glass and specialist solutions

Depending on the project, laminated glass or other configurations may also be considered. Official AGC guidance explains that the safety and acoustic properties of laminated glass depend on its construction, including the interlayers used. A single performance value should therefore not be assigned to every glass partition without knowing the complete assembly. See the manufacturer's information: laminated safety and acoustic glass.

Transparency, decoration and privacy

Clear glass transmits the most light and visually connects interiors. When more privacy is needed, ask about matt, decorative or tinted glass, or bands that limit visibility. Availability and suitability of a particular option must be confirmed for the selected system.

AGC notes that different types of glass—including clear, laminated and decorative glass—can be used in doors and partitions according to the function of the project. General application guidance and inspiration are available at AGC – Doors and Partitions. Materials available from ALHEN can also be reviewed in the glass and mirror sales.

Fittings, structure and opening method

Fittings are not merely decorative details. Hinges, tracks, handles, locks, profiles and fixing points work together with the pane, so they affect glass preparation and installation. Their colour and form can coordinate with door handles, lighting, window frames or other interior elements.

  • check which way the leaf should open and whether it could strike a wall or furniture;
  • state whether the passage will be used occasionally or many times each day;
  • mention if the door needs a lock, door closer or a particular handle;
  • tell us about underfloor heating, services or other restrictions in the fixing zone;
  • agree the colour of fittings and profiles before approving the order.

For an acoustic enclosure, the type of glass is only one factor. The complete system—including joints, seals, doors, gaps and connections to existing partitions—determines the outcome. If reducing noise is an important goal, mention it during the first conversation.

Measuring glass doors and partitions – what should you prepare?

Approximate information is sufficient for the first conversation. It helps assess the scale of the project and plan the next steps. Before production, however, an accurate survey must account for verticals, levels, uneven surfaces and the actual fixing points.

Checklist for an initial quotation

  1. Measure the width and height of the opening in at least several places.
  2. Take a straight-on photo of the whole opening and photos of the sides, floor and ceiling.
  3. Mark where the fixed section and the passage should be.
  4. Say whether you are considering a hinged or sliding door, or need a recommendation.
  5. Describe the required transparency, privacy level and frame colour.
  6. Provide the project location in Poznań or the surrounding area and the planned date.
  7. Attach a floor plan or architect's drawing if one is available.

Do not order elements from a single measurement taken at a random point. Walls and ceilings may not be perfectly parallel, while finished floor layers change the height of the opening. Accurate measurement reduces the risk of clashes and makes it possible to design the correct installation clearances.

What determines the price of a glass door and partition?

The price of a custom glass enclosure is not based solely on square metres. Two openings of similar area may require a different number of panes, different fittings, extra processing or a more complex installation.

  • dimensions, number and shape of the panes;
  • glass type, edge finishing, holes and cut-outs;
  • number of door leaves and selected opening system;
  • type, quantity and finish of fittings or profiles;
  • access conditions, transport, carrying and installation scope;
  • preparation of the opening and the possibility of safely fixing the elements.

To receive a useful quotation, describe the desired result and include the materials listed above. If the concept is not ready, ALHEN can help organise the options before the survey. For an individual project, go to Contact.

How should you care for glass doors and partitions?

For routine cleaning, a soft cloth and a product intended for glass are usually sufficient. Avoid hard scrapers and abrasive products that could damage the surface or the finish of the fittings. Clean details around profiles and fixings according to the recommendations for the relevant material.

If the leaf begins to operate differently, rubs, drops or makes an unusual sound, do not adjust components without first identifying the system. Contact the installer and describe the symptoms. Regular observation of the fixings helps detect changes that may require servicing at an early stage.

Frequently asked questions about glass doors and partitions

Will a glass partition work in a small flat?

Yes, especially when the aim is to define a function without blocking light. The passage, furniture layout and required privacy still need to be planned. In a small interior, the opening direction is particularly important; a sliding arrangement or a fixed section without a door may sometimes work better.

Can glass doors provide privacy?

Privacy can be increased with a matt or decorative finish, applied bands or suitable division patterns. Describe the requirement precisely: should the solution obscure an entire silhouette, restrict the view at eye level, or simply create a visual separation between zones?

Does a glass partition make a room quieter?

It can reduce sound transmission, but the result depends on the complete construction rather than the pane alone. Glass, profiles, seals, doors and connections to the building all matter. If acoustics are a priority, define the requirement before choosing the system and do not assume performance from appearance alone.

Does ALHEN provide measurement and installation in Poznań?

Yes. The scope can include professional measurement and installation. Service for a specific location in Poznań or the surrounding area and the schedule are confirmed individually. To begin, send photos, approximate dimensions and a short description of the required solution.

How long does it take to produce a custom door or partition?

Lead time depends on design complexity, availability of glass and fittings, processing scope and the current schedule. A reliable completion date can be confirmed after measurement and approval of the configuration. If the project has a firm deadline, include it in the initial enquiry.

Can I order the glass without installation?

The order scope is agreed individually. For glass-only orders, the customer must provide complete, correct dimensions and a processing specification. If you need a pane for your own project, see our custom-cut glass service and discuss the required cut-outs before placing the order.

Custom glass doors and partitions in Poznań – request a quotation

Send photos of the opening, its approximate width and height, the location, and whether you need a fixed partition, a hinged door or a sliding door. If you are unsure which option is best, describe how the room will be used and we will help establish the next steps.

Contact ALHEN
Cięcie Waterjet różnych materiałów – Alhen Artszkło Poradniki o szkle

Waterjet cutting – materials, file and quotation

Waterjet cutting uses water at very high pressure, together with abrasive for harder materials, to cut shapes without the heat-affected zone typical of thermal processes. It can be used for components made from metal, stone, ceramics, glass and many other materials. The result and price depend on the material, thickness, part geometry, file quality and required finish.

For ALHEN’s current machine capabilities and ordering information, see the Waterjet cutting service. This guide explains how to prepare a project for assessment and quotation.

How does Waterjet cutting work?

Water is pressurised and directed through a small orifice to create a concentrated jet. Water alone may be used for soft materials, while abrasive is added for harder ones. The head follows a programmed path to make straight lines, curves, holes and complex contours.

The absence of local heating is useful for heat-sensitive materials or when changes along the cut edge are undesirable. It does not mean every edge is immediately suitable as a decorative finish. Cut quality is selected for the component’s function, and some projects need subsequent processing.

Waterjet head cutting material with a high-pressure water stream
The cutting head follows a path prepared from the project geometry.

What materials can be cut with a Waterjet?

Material group Example applications What needs checking
Steel, aluminium and other metals Blanks, parts, signs and structural elements Grade, thickness, tolerances and surface condition
Stone and sintered slabs Decorative pieces, openings and cladding parts Brittleness, veining, material quality and edge distances
Ceramics and tiles Inlays, shapes and service openings Risk of chipping and the quality of the supplied tile
Glass Shapes and elements before further processing Glass type, edge condition and the next process
Plastics, rubber and layered materials Seals, inserts and technical components Reaction to water and the holding method

This list is indicative. A specific material should be confirmed from a sample, its documentation and the quality requirements. Brittle, delaminating or unknown materials may need a cutting trial.

ALHEN machine parameters

According to ALHEN’s currently published information, the system operates at about 6,000 bar, has a working area of approximately 3,010 × 1,540 mm and a declared accuracy of up to 0.1 mm. Materials up to approximately 100 mm thick may be cut. These are machine parameters, not a guarantee for every part: achievable accuracy and maximum thickness depend on the material, geometry, edge quality and agreed cutting standard. Feasibility is confirmed for each project before an order.

How should a Waterjet cutting file be prepared?

  1. Supply geometry at 1:1 scale and state the unit, preferably millimetres.
  2. Remove duplicate lines, open contours and accidental points that could alter the toolpath.
  3. Separate parts that require different materials, thicknesses or cutting qualities.
  4. Add a control drawing with key dimensions, quantities and the visible face.
  5. State tolerances only where they are functionally required.
  6. Describe the material: type, grade, thickness, format and who supplies it.

Clear vector or CAD files are normally the most useful, but confirm the accepted format before submission. A photograph, unscaled scan or screenshot is generally insufficient for a production toolpath. If only a physical pattern exists, ask whether the geometry can be recreated.

What affects edge quality?

Important factors include head speed, material type and thickness, jet diameter, secure holding and the required appearance. Faster cutting may suit a blank that will be processed later; slower cutting may be chosen when the cut surface matters more. Corners, small holes and thin bridges are constrained by the jet size and the behaviour of the material.

State which edges will remain visible and whether the part will later be welded, painted, ground or installed without additional processing.

Unusually shaped elements shown in ALHEN Waterjet projects
An example of non-standard shapes presented in ALHEN projects.

What should be supplied for a quotation?

  • the geometry file and a PDF preview or control drawing;
  • material type, grade and thickness;
  • sheet or slab dimensions and who supplies it;
  • the quantity of each part;
  • required tolerances and edge quality;
  • the visible face, pattern direction or grain;
  • the deadline and collection or delivery method.

Cost is affected by machine time, path length and complexity, the number of piercings, material thickness and hardness, sheet utilisation, data preparation and any additional processing. Pricing therefore relates to a specific file and scope.

Frequently asked questions

Does Waterjet cutting heat the material?

The process does not create the heat-affected zone typical of thermal cutting. The material still needs to be assessed for contact with water and the action of the jet.

Can a part be quoted from a photograph?

A photograph helps explain the application, but accurate pricing needs dimensions, material, quantity and preferably a geometry file.

Can ALHEN cut customer-supplied material?

Working with supplied material requires agreement on its type, format, condition and available spare quantity. A trial or spare piece may be advisable for unusual material.

Waterjet cutting in Poznań — send your project

Send the file, preview, material parameters and quantity through the ALHEN contact form. We will check whether the information is complete and identify anything else needed for a quotation.

Osoba ostrożnie tnie szkło diamentowym nożem, tworząc czystą i precyzyjną linię cięcia. Poradniki o szkle

How to choose made-to-measure glass: types, uses and safer decisions

Short answer: made-to-measure glass should be selected for the element’s function, support method, fittings, impact risk and conditions of use. The pane dimensions alone are not enough. Before requesting a quotation, prepare a sketch, photographs, approximate dimensions and a description of the application. Before production, confirm every hole, cut-out, edge and installation clearance.

This guide helps organise those decisions. For processing options, available services and the quotation route, see glass cut to size – cutting, processing and installation. That page remains ALHEN’s principal commercial page for this service.

Start with the application, then choose the glass

The same pane will not be the right solution for a shelf, kitchen splashback, door, shower enclosure and balustrade. Begin with a few practical questions:

  • could a person strike or fall against the glass;
  • does the element carry a load or provide fall protection;
  • will it be exposed to water, elevated temperatures or frequent temperature changes;
  • how will it be supported or fixed;
  • are holes, cut-outs, hinges, handles or other fittings required;
  • will the edges be visible and accessible during everyday use;
  • which regulations, project requirements or system documentation apply to the element.
Application Information needed first What needs specific confirmation
Shelf, worktop or screen dimensions, support, expected load, visible edges thickness, support spacing and edge processing
Kitchen splashback dimensions, corners, sockets, heating-appliance type holes and cut-outs before any toughening
Door or partition opening geometry, opening direction, fitting model clearances, hole positions and system compatibility
Shower enclosure levels, tray or floor, fittings, door direction matching the panes and fittings as one solution
Balustrade design, fixing system, substrate, loads the complete specification, not only the pane

Early dimensions can support an indicative quotation. They should not automatically become production dimensions for a permanently installed element.

Toughened, laminated and patterned glass – what is the difference?

Tempered Glass

Toughening changes the stress distribution in glass and increases its mechanical strength and resistance to temperature differences compared with the starting glass. Cutting, holes, cut-outs and edge processing must all be planned before toughening. A finished toughened pane should not subsequently be cut, drilled or ground.

The word “toughened” alone does not establish whether the glass is suitable for a particular use. Its dimensions, thickness, shape, edges, fixing method, loads and project requirements also matter.

Laminated glass

Laminated glass consists of at least two panes joined by an interlayer. If the glass breaks, this layer helps retain fragments. The level of protection depends on the complete laminate composition, not only the material name.

Laminated and toughened glass are not interchangeable. Some solutions combine both types of processing, but their construction must be selected for the function, fixing system and project requirements.

Patterned, matt, tinted and painted glass

These options are selected mainly for the desired level of privacy, light transmission, colour and interior character. View a sample under the intended lighting and beside the wall, furniture and fitting colours. A pattern or colour may appear different depending on the light direction and background.

A decorative finish does not replace a safety assessment. If an element is in an impact zone, beside a circulation route or performs a protective function, its complete specification must be confirmed separately.

An ALHEN project: Visiosun patterned glass

Szkło ornamentowe Visiosun w czarnej ramie w łazience – realizacja ALHEN
Visiosun patterned glass in a black frame in a finished bathroom – an ALHEN project.

In this ALHEN project, tall Visiosun patterned glazing in a black frame stands beside the washbasin area in a finished bathroom. Its vertical texture reduces direct visibility while allowing light from the other side of the pane to be used. The photograph shows the visual result; the exact dimensions, thickness, fixing method and project location are not stated because they are not confirmed in the documentation available for this guide.

It also shows why a sample and a photograph of the entire interior matter. The glass pattern, profile width, frame colour and neighbouring materials create one result that cannot be assessed from a small product sample alone.

Plan processing and fittings before production

State which edges will remain visible and mark every hole, cut-out and corner. If the pane must work with a hinge, handle or fixing system, provide the manufacturer and model or attach the technical drawing.

Hole positions should not be estimated by eye. A small discrepancy can prevent correct installation, and changing a finished toughened pane is not a workable correction.

What should you prepare for a made-to-measure glass quotation?

Prepare:

  1. the application and quantity;
  2. width and height in millimetres, with the top edge identified;
  3. a simple sketch showing holes, cut-outs, corners and reference points;
  4. a photograph of the full wall, recess or installation area;
  5. the support method, fittings and opening direction, where relevant;
  6. which edges will remain visible;
  7. the intended appearance: clear, matt, tinted, painted or patterned glass;
  8. whether collection, transport, survey or installation is required.

If walls or a recess are not perfectly parallel, measure them in several places. For an irregular shape, add diagonals and unambiguous reference points. Do not guess installation clearances; they should follow from the selected solution.

When is a project consultation required?

Balustrades, large doors and partitions, overhead elements, load-bearing glass and panes working with a specific fitting system all need particular verification. In these cases, selection should not rely on a sample thickness found online.

The correct composition depends on dimensions, fixings, substrate, expected loads and project documentation. ALHEN confirms the available option and scope of work after receiving information about the specific application.

Next step

See the full scope of made-to-measure glass cutting, processing and installation. Further examples are available on the luster na wymiar, made-to-measure shower enclosure and glass doors and partitions.

For an initial quotation, send a sketch, approximate dimensions, photographs of the location and a description of the application through the ALHEN contact form. Przed realizacją szczegóły techniczne warto skonsultować z doświadczonym szklarzem w Poznaniu – ostateczny wariant szkła, obróbki i montażu zostanie potwierdzony dla uzgodnionego zakresu.

Technical sources

These sources explain general properties and product-standard references. They do not state that ALHEN uses a particular brand or that one glass configuration suits every project.

Stylowa balustrada na schodach wewnętrznych Poradniki o szkle

Glass balustrades in Poznań – types and selection

A good glass balustrade should combine safety, everyday comfort and a design suited to the building. Before requesting a quotation, establish the installation location, fixing method, glass type and desired visual effect. This guide explains the main differences and the information that helps ALHEN prepare a quotation for a glass balustrade in Poznań and the surrounding area.

Key decisions at a glance

  • Location: stairs, mezzanine, balcony, terrace or landing.
  • Conditions: an interior or exposure to rain, wind and temperature changes.
  • Fixing method: continuous channels, posts, point fixings or a combined solution.
  • Glass type: selected for the structure, dimensions and safety requirements, not only appearance.
  • Finish: clear, matt, tinted or another agreed option.
  • Survey: final dimensions are best confirmed after floors, cladding and stair treads are complete.

For project examples and ordering information, see ALHEN’s glass balustrade service. This article helps you prepare the decisions needed before a survey and quotation.

Where are glass balustrades used?

Glass balustrades work well in homes, commercial interiors and office buildings. Along stairs and mezzanines, they preserve light and help a space feel open. On balconies and terraces, they reduce the visual weight of structural divisions. Each location, however, has different requirements for loads, edges, fixings and exposure to the weather.

A system should therefore not be chosen from a photograph alone. A detail that looks light indoors will not necessarily be suitable for an exposed slab edge outside. The selection should consider the building design, the supporting structure and current technical requirements.

Fixing systems compared

Solution Visual effect Typical use What to check
Continuous channel A large, almost uninterrupted glass surface Stairs, mezzanines and balconies Whether the channel can be fixed securely and integrated with the finish
Point fixings Minimal, with visible discs or brackets Sides of stair flights and slab edges Access to the structure and suitable distance from the edge
Posts A regular division along the balustrade Stairs, balconies and terraces Post spacing, infill type and anchoring method
Combined solution Adapted to unusual geometry Areas joining stairs, landings and balconies Consistent detailing where different sections meet

The final system depends on the geometry and construction of the installation area. For an initial consultation, provide photographs of the whole section, close-ups of the edge, and a drawing or approximate dimensions.

What glass is used for balustrades?

Balustrades use safety-glass solutions selected for the specific structure. Depending on the design, this may be toughened glass, laminated glass or a construction combining both properties. Lamination helps retain fragments in the interlayer if a pane is damaged, while toughening increases resistance to stress and temperature changes. The required composition and thickness must follow from the application, pane size, support method and design loads.

Polish technical conditions for buildings set requirements for balustrades and refer to impact-resistant glass which breaks into small, non-sharp fragments when used as a glass element. The appropriate solution must always be verified for the individual building by the people responsible for its design and construction.

If you also need individual panes made to size, read our guide to toughened, laminated and decorative glass cut to size.

Interior and exterior balustrades

Indoors, the main considerations are stair geometry, light, the handrail route and the junction with the floor. Outdoors, water, frost, UV exposure, wind and drainage must also be considered. Edge protection and the suitability of installation components for the environment are equally important.

For a balcony or terrace, provide details of the floor layers, insulation, waterproofing and the construction of the slab edge. This helps determine where secure anchoring may be possible and whether additional consultation with the designer is needed.

Examples of ALHEN projects

The photographs below show several arrangements from ALHEN glazing projects. Their differences are not purely visual: every arrangement requires a separate survey and panes made for its installation location.

Glass balustrade beside an interior staircase by ALHEN
An interior glass balustrade providing visually light protection along the stair flight.
Glass balustrade fitted to stair geometry by ALHEN
Glass panes fitted to the stair geometry and surrounding finishes.
Contemporary glass stair balustrade by ALHEN
A contemporary glass balustrade designed to preserve available light.
Glass balustrade with visible metal fixings by ALHEN
An example combining glass panes with visible metal fixing components.

What should you provide for a survey and quotation?

The most accurate offer is based on a survey and agreed details. At the initial stage, the following information is usually enough to assess the scope:

  1. the project address or town;
  2. photographs of the whole staircase, balcony or mezzanine and close-ups of the substrate;
  3. approximate lengths of individual sections and the number of stair flights;
  4. plans, sections or designer’s drawings, if available;
  5. whether the installation is indoors or outdoors;
  6. the preferred appearance of the glass, fittings and handrail;
  7. the current construction stage and intended installation date.

A final production survey is best carried out once finished levels and cladding thicknesses are known. An early consultation is still valuable because it allows fixing points and supporting construction to be planned before they are covered.

What affects the price of a glass balustrade?

The main factors are the total length and number of sections, stair geometry, glass type and processing, the fixing system, handrails, the number of holes and cut-outs, access to the installation area and preparation of the supporting structure. Two balustrades of the same length may have different prices if one uses simple rectangular panes and the other requires many unusually shaped pieces.

A reliable quotation must therefore relate to a specific location and agreed option. Photographs and approximate dimensions are sufficient for an initial proposal; the survey confirms the scope before production.

Frequently asked questions

Can a balustrade be priced from photographs?

Photographs and dimensions are normally sufficient for an initial assessment. Pane production still requires confirmation of dimensions, the supporting construction and fixing details.

When should the survey take place?

It is worth discussing the balustrade during construction so that the fixings can be planned. The production survey usually takes place after final floor, stair tread and cladding levels have been established.

Can the glass be matt or tinted?

Several visual effects may be possible, but their availability and parameters need to be confirmed for the selected system and project requirements.

Glass balustrades in Poznań — the next step

ALHEN makes bespoke glazing solutions for projects in Poznań and the surrounding region. Send photographs, approximate dimensions and the location through the contact form. If you are also planning a glass door or room division, read our guide to glass doors and partitions — selection, survey and quotation.

Copyrights © by ALHEN Artszkło Sp. z o.o. 2013 - 2024. All rights reserved.
en_GBEN
pl_PLPL en_GBEN