Tag: Tempered glass

Panel szklany do kuchni w kolorze białym – realizacja Poznań Poradniki o szkle

Glass kitchen splashbacks in Poznań – selection and quotation

A glass splashback is easy to clean, can make a kitchen feel larger and allows colour or artwork to be coordinated with the cabinetry. Before ordering, however, the glass type must be selected, socket cut-outs planned, conditions around the hob checked and an accurate survey completed. This guide compares the main options and explains what affects quotations for glass kitchen splashbacks in Poznań.

Lacobel or printed glass?

Option Main benefit What to consider Best suited to
Glass painted in a single colour A consistent surface and a broad colour choice Compare the shade with cabinet fronts in the intended light Minimal, calm interiors
Printed glass An individual image, photograph or pattern File quality, cropping and visibility behind equipment Kitchens needing a strong decorative accent
Clear glass Protects a visible wall, wallpaper or decorative finish The substrate and adhesive arrangement must look tidy Projects retaining the existing wall finish
Matt or tinted glass A restrained effect with reduced reflections Different lighting can change perceived colour Contemporary, darker schemes

Lacobel is AGC’s brand of painted glass. The manufacturer describes it as an interior product; a splashback project must use the appropriate variant and installation method. See the AGC Lacobel technical information. Confirm available colours and product variants when ordering.

Should a kitchen splashback be toughened?

Toughened glass is often selected above worktops because it is more resistant to stress and temperature changes. Every hole, cut-out and edge treatment is completed before toughening; a socket cannot simply be moved or a pane trimmed afterwards. Selection near a hob must account for the appliance instructions, required distances and ventilation conditions.

Do not rest hot cookware directly against the splashback or treat the glass as a substitute for the hob manufacturer’s requirements. For a gas installation, the design and safe distance from burners must be checked.

How to survey a glass splashback

  1. Measure wall width and height at several points.
  2. Mark the underside of wall units and the worktop, checking their level.
  3. Record the exact position of sockets, switches, pipes and other obstacles.
  4. Identify internal and external corners and any pane joints.
  5. Add photographs of the entire kitchen and close-ups of unusual details.
  6. State the hob or cooker model and the existing wall finish.

A production survey is best completed after the cabinets and worktop have been installed and final levels are known. If a pane needs to fit below an extractor or into narrow channels, the installation sequence and necessary clearances must be considered. ALHEN can verify the scope on site for an agreed project.

A project before and after installation

The photographs below show a kitchen before and after a glass splashback was installed. A documented project makes it easier to see how one continuous glass surface changes the visual balance and available light.

Kitchen wall before installation of a glass splashback
The wall above the worktop before installation.
Kitchen after installation of a fitted glass splashback by ALHEN
The kitchen after installation of the made-to-measure pane.
Before and after comparison of an ALHEN glass kitchen splashback
A comparison of the kitchen before and after the project.

Colour, print and Optiwhite glass

Standard clear glass may have a slight green tint, particularly noticeable with whites and pale colours. Low-iron glass such as Optiwhite reduces this effect and can reproduce whites and light artwork more faithfully. Compare samples where possible, because glass thickness, lighting and substrate colour also affect the result.

For printed glass, supply a high-resolution file and agree the crop on a visual proof. Important parts of an image should not fall behind socket cut-outs, pane joints, the extractor or tall equipment on the worktop.

Installation and care

The substrate should be stable, even and prepared for the chosen installation method. Adhesives, sealants and channels must be compatible with the glass and its coating. On painted glass, unsuitable installation products may affect the decorative layer, so use solutions recommended for the product.

Routine cleaning normally needs only a soft cloth and a mild glass cleaner. Avoid abrasives, sharp scrapers and aggressive products that may damage the coating, joints or edge seals.

What affects the price of a glass splashback?

There is no single reliable price per metre for every splashback. A quotation depends on:

  • glass type, thickness and variant;
  • toughening, colour, artwork or an additional coating;
  • the number, dimensions and shapes of the panes;
  • socket holes, cut-outs and edge processing;
  • survey, transport, access and installation;
  • substrate preparation and an unusual work sequence.

Photographs and approximate dimensions are sufficient for an initial proposal. The final quotation relates to the selected material, colour or print and verified dimensions.

Glass kitchen splashbacks in Poznań — quotation

Send photographs, approximate dimensions, the number of sockets and your preferred colour or image through the contact form. You can also view ALHEN’s printed glass splashback projects and read how to order glass cut to size.

Drzwi i ścianki szklane na wymiar w czarnej konstrukcji – realizacja ALHEN Poradniki o szkle

Custom Glass Doors and Partitions – Guide

Custom glass doors and partitions make it possible to separate zones in a house, flat, office or commercial interior while preserving daylight and a sense of open space. The best results come from a design tailored to the specific opening, intended use, required privacy and installation conditions.

In this guide, ALHEN Artszkło explains when to choose a door, a fixed partition or a combined solution, which glass and fittings to consider, what to prepare for measurement, and what determines the price in Poznań and the surrounding area.

Key points at a glance

  • For a bright division of the interior consider a fixed partition, a hinged door, a sliding door or a combined arrangement.
  • Glass and the fixing system are selected for the dimensions, installation conditions, room function and required level of privacy.
  • For an initial quotation prepare photos of the opening, its approximate width and height, the project location and a description of the desired arrangement.
  • Before production an accurate survey and confirmation of every design element are required.

Contents

What are custom glass doors and partitions?

A custom glass enclosure is a set of fixed panes, doors and fixing components designed for a specific location. It can fill an entire opening between walls, form a corner, create a private office or combine a fixed section with a passage. Unlike an off-the-shelf product, its dimensions, divisions, opening method and fitting design are determined by the conditions of the individual project.

A solution should not be chosen from an inspiration photo alone. The substrate, possible fixing points in the walls, floor and ceiling, user traffic, furniture layout and concealed services also matter. The final configuration is therefore established after the location has been assessed and accurately measured.

Where do custom glass doors and partitions work well?

Glass helps organise an interior without building a full opaque barrier. It passes light between zones and preserves visual continuity, which makes it suitable for both modern and more traditional schemes.

  • In houses and flats: between a kitchen and living room, in a hallway, dressing room, home office or an unusual recess.
  • In offices: to create a meeting room, private office, quiet work zone, reception area or a passage between teams.
  • In commercial interiors: as a divider between the customer area and back room, an internal shopfront element or a clear functional boundary.
  • In renovated buildings: when an opening has a non-standard width, height or shape and requires an individual solution.

See more examples in the ALHEN portfolio: glass doors and walls. The gallery presents different arrangements, frame colours and ways of combining panes with doors.

Fixed partition, hinged door or sliding door?

SolutionWhen to consider itWhat to check before deciding
Fixed glass partitionWhen a permanent division is required and no passage is needed at that pointSubstrate, fixing points, pane divisions and required privacy
Hinged doorWhen an intuitive and frequently used passage is importantSwing clearance, opening direction and possible collisions with furniture
Sliding doorWhen there is not enough space beside the opening for a door leaf to swing freelySpace for the pane to slide, system guidance and access to fixing points
Partition with a doorWhen one design must both divide a zone and provide a passageProportions of fixed elements, passage width and frequency of use

No single arrangement suits every interior. Hinged doors can be convenient but need clear swing space. A sliding system saves space in front of the passage but requires room for the leaf to move aside. For a wide opening, combining a door with fixed sections is often practical.

ALHEN project: a glass wall in a black frame

Drzwi i ścianka szklana na wymiar w czarnej konstrukcji – realizacja ALHEN
ALHEN project example: a tall glass partition with sliding doors and black divisions.

The photo shows how an enclosure can define a room while preserving views and daylight. Regular black divisions become part of the design, while the sliding leaf needs no swing area in front of the passage. This is a visual example; structural details are always determined individually for the specific location.

Which glass should you choose for a door and partition?

Glass selection begins with the function of the enclosure. A transparent divider between a kitchen and living room has different requirements from an office that needs partial privacy or a heavily used passage in commercial premises. Pane dimensions, support method, fittings and conditions of use all matter.

Tempered Glass

ALHEN uses toughened glass in many door and wall projects. Holes and cut-outs for hinges, handles and other fittings must be planned before toughening, so the complete design is approved before the pane is manufactured. A specialist selects the thickness and format for the specific system, dimensions and installation conditions.

Laminated glass and specialist solutions

Depending on the project, laminated glass or other configurations may also be considered. Official AGC guidance explains that the safety and acoustic properties of laminated glass depend on its construction, including the interlayers used. A single performance value should therefore not be assigned to every glass partition without knowing the complete assembly. See the manufacturer's information: laminated safety and acoustic glass.

Transparency, decoration and privacy

Clear glass transmits the most light and visually connects interiors. When more privacy is needed, ask about matt, decorative or tinted glass, or bands that limit visibility. Availability and suitability of a particular option must be confirmed for the selected system.

AGC notes that different types of glass—including clear, laminated and decorative glass—can be used in doors and partitions according to the function of the project. General application guidance and inspiration are available at AGC – Doors and Partitions. Materials available from ALHEN can also be reviewed in the glass and mirror sales.

ALHEN project: Waterfall glass between a bedroom and dressing area

Corner partition made of patterned Waterfall glass in a black frame beside a bed
Patterned glass and a matt black frame separating a bedroom and dressing area — an ALHEN project.

In this ALHEN project, patterned glass separates the dressing area from the bedroom. A matt black frame defines the partition, while the glass texture adds a decorative detail. The photograph shows a corner arrangement with a door.

For a similar project, discuss the required privacy, door-opening direction and fixing conditions. A material sample is best assessed in the lighting of the planned interior; a photograph alone cannot establish the performance of the complete partition.

Explore glass doors and partitions made by ALHEN

Fittings, structure and opening method

Fittings are not merely decorative details. Hinges, tracks, handles, locks, profiles and fixing points work together with the pane, so they affect glass preparation and installation. Their colour and form can coordinate with door handles, lighting, window frames or other interior elements.

  • check which way the leaf should open and whether it could strike a wall or furniture;
  • state whether the passage will be used occasionally or many times each day;
  • mention if the door needs a lock, door closer or a particular handle;
  • tell us about underfloor heating, services or other restrictions in the fixing zone;
  • agree the colour of fittings and profiles before approving the order.

For an acoustic enclosure, the type of glass is only one factor. The complete system—including joints, seals, doors, gaps and connections to existing partitions—determines the outcome. If reducing noise is an important goal, mention it during the first conversation.

Measuring glass doors and partitions – what should you prepare?

Approximate information is sufficient for the first conversation. It helps assess the scale of the project and plan the next steps. Before production, however, an accurate survey must account for verticals, levels, uneven surfaces and the actual fixing points.

Checklist for an initial quotation

  1. Measure the width and height of the opening in at least several places.
  2. Take a straight-on photo of the whole opening and photos of the sides, floor and ceiling.
  3. Mark where the fixed section and the passage should be.
  4. Say whether you are considering a hinged or sliding door, or need a recommendation.
  5. Describe the required transparency, privacy level and frame colour.
  6. Provide the project location in Poznań or the surrounding area and the planned date.
  7. Attach a floor plan or architect's drawing if one is available.

Do not order elements from a single measurement taken at a random point. Walls and ceilings may not be perfectly parallel, while finished floor layers change the height of the opening. Accurate measurement reduces the risk of clashes and makes it possible to design the correct installation clearances.

What determines the price of a glass door and partition?

The price of a custom glass enclosure is not based solely on square metres. Two openings of similar area may require a different number of panes, different fittings, extra processing or a more complex installation.

  • dimensions, number and shape of the panes;
  • glass type, edge finishing, holes and cut-outs;
  • number of door leaves and selected opening system;
  • type, quantity and finish of fittings or profiles;
  • access conditions, transport, carrying and installation scope;
  • preparation of the opening and the possibility of safely fixing the elements.

To receive a useful quotation, describe the desired result and include the materials listed above. If the concept is not ready, ALHEN can help organise the options before the survey. For an individual project, go to Contact.

How should you care for glass doors and partitions?

For routine cleaning, a soft cloth and a product intended for glass are usually sufficient. Avoid hard scrapers and abrasive products that could damage the surface or the finish of the fittings. Clean details around profiles and fixings according to the recommendations for the relevant material.

If the leaf begins to operate differently, rubs, drops or makes an unusual sound, do not adjust components without first identifying the system. Contact the installer and describe the symptoms. Regular observation of the fixings helps detect changes that may require servicing at an early stage.

Frequently asked questions about glass doors and partitions

Will a glass partition work in a small flat?

Yes, especially when the aim is to define a function without blocking light. The passage, furniture layout and required privacy still need to be planned. In a small interior, the opening direction is particularly important; a sliding arrangement or a fixed section without a door may sometimes work better.

Can glass doors provide privacy?

Privacy can be increased with a matt or decorative finish, applied bands or suitable division patterns. Describe the requirement precisely: should the solution obscure an entire silhouette, restrict the view at eye level, or simply create a visual separation between zones?

Does a glass partition make a room quieter?

It can reduce sound transmission, but the result depends on the complete construction rather than the pane alone. Glass, profiles, seals, doors and connections to the building all matter. If acoustics are a priority, define the requirement before choosing the system and do not assume performance from appearance alone.

Does ALHEN provide measurement and installation in Poznań?

Yes. The scope can include professional measurement and installation. Service for a specific location in Poznań or the surrounding area and the schedule are confirmed individually. To begin, send photos, approximate dimensions and a short description of the required solution.

How long does it take to produce a custom door or partition?

Lead time depends on design complexity, availability of glass and fittings, processing scope and the current schedule. A reliable completion date can be confirmed after measurement and approval of the configuration. If the project has a firm deadline, include it in the initial enquiry.

Can I order the glass without installation?

The order scope is agreed individually. For glass-only orders, the customer must provide complete, correct dimensions and a processing specification. If you need a pane for your own project, see our custom-cut glass service and discuss the required cut-outs before placing the order.

Custom glass doors and partitions in Poznań – request a quotation

Send photos of the opening, its approximate width and height, the location, and whether you need a fixed partition, a hinged door or a sliding door. If you are unsure which option is best, describe how the room will be used and we will help establish the next steps.

Osoba ostrożnie tnie szkło diamentowym nożem, tworząc czystą i precyzyjną linię cięcia. Poradniki o szkle

How to choose made-to-measure glass: types, uses and safer decisions

Short answer: made-to-measure glass should be selected for the element’s function, support method, fittings, impact risk and conditions of use. The pane dimensions alone are not enough. Before requesting a quotation, prepare a sketch, photographs, approximate dimensions and a description of the application. Before production, confirm every hole, cut-out, edge and installation clearance.

This guide helps organise those decisions. For processing options, available services and the quotation route, see glass cut to size – cutting, processing and installation. That page remains ALHEN’s principal commercial page for this service.

Start with the application, then choose the glass

The same pane will not be the right solution for a shelf, kitchen splashback, door, shower enclosure and balustrade. Begin with a few practical questions:

  • could a person strike or fall against the glass;
  • does the element carry a load or provide fall protection;
  • will it be exposed to water, elevated temperatures or frequent temperature changes;
  • how will it be supported or fixed;
  • are holes, cut-outs, hinges, handles or other fittings required;
  • will the edges be visible and accessible during everyday use;
  • which regulations, project requirements or system documentation apply to the element.
Application Information needed first What needs specific confirmation
Shelf, worktop or screen dimensions, support, expected load, visible edges thickness, support spacing and edge processing
Kitchen splashback dimensions, corners, sockets, heating-appliance type holes and cut-outs before any toughening
Door or partition opening geometry, opening direction, fitting model clearances, hole positions and system compatibility
Shower enclosure levels, tray or floor, fittings, door direction matching the panes and fittings as one solution
Balustrade design, fixing system, substrate, loads the complete specification, not only the pane

Early dimensions can support an indicative quotation. They should not automatically become production dimensions for a permanently installed element.

Toughened, laminated and patterned glass – what is the difference?

Tempered Glass

Toughening changes the stress distribution in glass and increases its mechanical strength and resistance to temperature differences compared with the starting glass. Cutting, holes, cut-outs and edge processing must all be planned before toughening. A finished toughened pane should not subsequently be cut, drilled or ground.

The word “toughened” alone does not establish whether the glass is suitable for a particular use. Its dimensions, thickness, shape, edges, fixing method, loads and project requirements also matter.

Laminated glass

Laminated glass consists of at least two panes joined by an interlayer. If the glass breaks, this layer helps retain fragments. The level of protection depends on the complete laminate composition, not only the material name.

Laminated and toughened glass are not interchangeable. Some solutions combine both types of processing, but their construction must be selected for the function, fixing system and project requirements.

Patterned, matt, tinted and painted glass

These options are selected mainly for the desired level of privacy, light transmission, colour and interior character. View a sample under the intended lighting and beside the wall, furniture and fitting colours. A pattern or colour may appear different depending on the light direction and background.

A decorative finish does not replace a safety assessment. If an element is in an impact zone, beside a circulation route or performs a protective function, its complete specification must be confirmed separately.

An ALHEN project: Visiosun patterned glass

Szkło ornamentowe Visiosun w czarnej ramie w łazience – realizacja ALHEN
Visiosun patterned glass in a black frame in a finished bathroom – an ALHEN project.

In this ALHEN project, tall Visiosun patterned glazing in a black frame stands beside the washbasin area in a finished bathroom. Its vertical texture reduces direct visibility while allowing light from the other side of the pane to be used. The photograph shows the visual result; the exact dimensions, thickness, fixing method and project location are not stated because they are not confirmed in the documentation available for this guide.

It also shows why a sample and a photograph of the entire interior matter. The glass pattern, profile width, frame colour and neighbouring materials create one result that cannot be assessed from a small product sample alone.

Plan processing and fittings before production

State which edges will remain visible and mark every hole, cut-out and corner. If the pane must work with a hinge, handle or fixing system, provide the manufacturer and model or attach the technical drawing.

Hole positions should not be estimated by eye. A small discrepancy can prevent correct installation, and changing a finished toughened pane is not a workable correction.

What should you prepare for a made-to-measure glass quotation?

Prepare:

  1. the application and quantity;
  2. width and height in millimetres, with the top edge identified;
  3. a simple sketch showing holes, cut-outs, corners and reference points;
  4. a photograph of the full wall, recess or installation area;
  5. the support method, fittings and opening direction, where relevant;
  6. which edges will remain visible;
  7. the intended appearance: clear, matt, tinted, painted or patterned glass;
  8. whether collection, transport, survey or installation is required.

If walls or a recess are not perfectly parallel, measure them in several places. For an irregular shape, add diagonals and unambiguous reference points. Do not guess installation clearances; they should follow from the selected solution.

When is a project consultation required?

Balustrades, large doors and partitions, overhead elements, load-bearing glass and panes working with a specific fitting system all need particular verification. In these cases, selection should not rely on a sample thickness found online.

The correct composition depends on dimensions, fixings, substrate, expected loads and project documentation. ALHEN confirms the available option and scope of work after receiving information about the specific application.

Next step

See the full scope of made-to-measure glass cutting, processing and installation. Further examples are available on the made-to-measure mirrors, made-to-measure shower enclosure and glass doors and partitions.

For an initial quotation, send a sketch, approximate dimensions, photographs of the location and a description of the application through the ALHEN contact form. Przed realizacją szczegóły techniczne warto skonsultować z doświadczonym szklarzem w Poznaniu – ostateczny wariant szkła, obróbki i montażu zostanie potwierdzony dla uzgodnionego zakresu.

Technical sources

These sources explain general properties and product-standard references. They do not state that ALHEN uses a particular brand or that one glass configuration suits every project.

en_GBEN